Trisaminomethane–cobalt complex supported on Fe3O4 magnetic nanoparticles as an efficient recoverable nanocatalyst for oxidation of sulfides and C–S coupling reactions

In this work, trisaminomethane–cobalt complex immobilized onto the surface of Fe₃O₄ magnetic nanoparticles was successfully prepared via a simple and inexpensive procedure. The prepared nanocatalyst was considered a robust and clean nanoreactor catalyst for the oxidation and synthesis of sulfides under green conditions. This ecofriendly heterogeneous catalyst was characterized by Fourier transform infrared spectroscopy, X-ray diffractometry, energy-dispersive X-ray spectroscopy, inductively coupled plasma-atomic emission spectroscopy, thermogravimetric analysis, vibrating sample magnetometry, X-ray mapping, scanning electron microscopy, and transmission electron microscopy techniques. Use of green medium, easy separation and workup, excellent reusability of the nanocatalyst, and short reaction time are some outstanding advantages of this method.     

Breakthrough of 2- to 3-μm scale U–Pb zircon dating using Cameca IMS-1280HR SIMS

A zircon U–Pb dating method with a high spatial resolution of 2- to 3-μm was successfully implemented by using Cameca IMS-1280HR SIMS in this study. Homemade cathode and modified intermediate pole were used to improve the intrinsic performance of duoplasmatron ion source. An O⁻ primary beam with intensity of approximately 3 μA and stability of 0.68% over 40 minutes was achieved and could be used continuously for more than 240 hours under high current conditions. Under Gaussian illumination mode, a 2- to 3-μm O⁻ primary beam was obtained with an intensity of approximately 200 pA. Four standard zircons, namely, 91500, Temora, Plešovice, and Qinghu, were dated using the 2- to 3-μm high spatial resolution U–Pb isotopic analysis, yielding U–Pb ages consistent with their recommended values, within errors. Our work shows that zircon U–Pb dating with high accuracy and spatial resolution can be achieved, on the basis of a series of duoplasmatron modification and instrumental optimization.     

Statistical analysis of S/N-curves by means of a fatigue database for polypropylene

Material databases of plastics are becoming more and more the focus of applied science and commercial use in industry. Material properties of material manufacturers are often provided in publicly accessible material databases, which usually contain processing and mechanical properties under static loadings. Fatigue strength values are usually not accessible. The fatigue data for thermoplastics is of particular interest, as these materials have a particularly high lightweight construction potential and can be processed with a high degree of automation and reproducibility.Individual fatigue strength parameters for a specific material, environmental condition, geometry and loadings have been investigated in numerous publications. However, no work has been found in which fundamental interactions of different materials, environmental conditions, geometries and loadings on the course of the S/N-Curve have been investigated.In this paper, different effect relationships between temperature, filler type and filler content, fiber orientation and load ratio will be presented for the material Polypropylene (PP). A fatigue strength database of 11 different material manufacturers, from 71 different S/N-Curves with 606 tested samples, serves as a basis. The fatigue database enables a digital twin, which is used for the design of structural components to add a third dimension with artificial intelligence, and which is trained by an engineer. From the determined effect relationships, fatigue factors are to be derived and can be used to evaluate the fatigue strength of a component in the design process and to train the digital twin. The fatigue-strength values from the database also allow a statistical consideration of the slope k and the scattering of the S/N-Curve. The different S/N-Curves are transferred into a Haigh diagram, from which the functional course of the mean stress is determined.     

Analysis of new psychoactive substances in human urine by ultra‐high performance supercritical fluid and liquid chromatography: Validation and comparison

New psychoactive substances represent serious social and health problem as tens of new compounds are detected in Europe annually. They often show structural proximity or even isomerism, which complicates their analysis. Two methods based on ultra high performance supercritical fluid chromatography and ultra high performance liquid chromatography with mass spectrometric detection were validated and compared. A simple dilute‐filter‐and‐shoot protocol utilizing propan‐2‐ol or methanol for supercritical fluid or liquid chromatography, respectively, was proposed to detect and quantify 15 cathinones and phenethylamines in human urine. Both methods offered fast separation (<3 min) and short total analysis time. Precision was well <15% with a few exceptions in liquid chromatography. Limits of detection in urine ranged from 0.01 to 2.3 ng/mL, except for cathinone (5 ng/mL) in supercritical fluid chromatography. Nevertheless, this technique distinguished all analytes including four pairs of isomers, while liquid chromatography was unable to resolve fluoromethcathinone regioisomers. Concerning matrix effects and recoveries, supercritical fluid chromatography produced more uniform results for different compounds and at different concentration levels. This work demonstrates the performance and reliability of supercritical fluid chromatography and corroborates its applicability as an alternative tool for analysis of new psychoactive substances in biological matrixes.     

Purity determination of a new antifungal drug candidate using quantitative 1H NMR spectroscopy: Method validation and comparison of calibration approaches

Quantitative nuclear magnetic resonance (qNMR) is an analytical technique that offers numerous advantages in pharmaceutical applications including minimum sample preparation and rapid data collection times with no need for response factor corrections, being a powerful tool for assaying drug content in both drug discovery and early drug development. In the present work, we have applied qNMR, using both the internal standard and the electronic reference to access in vivo concentrations 2 calibration methods, to assess the purity of RI76, a novel antifungal drug candidate. NMR acquisition and processing parameters were optimized in order to obtain spectra with intense, well-resolved signals of completely relaxed nuclei. The analytical method was validated following current guidelines, demonstrating selectivity, linearity, accuracy, precision, and robustness. The calibration approaches were statistically compared, and no significant difference was observed when comparing the obtained results and their dispersion in terms of relative standard deviation. The proposed qNMR method may, therefore, be used for both qualitative and quantitative assessments of RI76 in early drug development and for characterization of this compound.     

A molecular fluorophore in citric acid/ethylenediamine carbon dots identified and quantified by multinuclear solid-state nuclear magnetic resonance

The composition of fluorescent polymer nanoparticles, commonly referred to as carbon dots, synthesized by microwave-assisted reaction of citric acid and ethylenediamine was investigated by ¹³C, ¹³C{¹H}, ¹H─¹³C, ¹³C{¹⁴N}, and ¹⁵N solid-state nuclear magnetic resonance (NMR) experiments. ¹³C NMR with spectral editing provided no evidence for significant condensed aromatic or diamondoid carbon phases. ¹⁵N NMR showed that the nanoparticle matrix has been polymerized by amide and some imide formation. Five small, resolved ¹³C NMR peaks, including an unusual ═CH signal at 84 ppm (¹H chemical shift of 5.8 ppm) and ═CN₂ at 155 ppm, and two distinctive ¹⁵N NMR resonances near 80 and 160 ppm proved the presence of 5-oxo-1,2,3,5-tetrahydroimidazo[1,2-a]pyridine-7-carboxylic acid (IPCA) or its derivatives. This molecular fluorophore with conjugated double bonds, formed by a double cyclization reaction of citric acid and ethylenediamine as first shown by Y. Song, B. Yang, and coworkers in 2015, accounts for the fluorescence of the carbon dots. Cross-peaks in a ¹H─¹³C HETCOR spectrum with brief ¹H spin diffusion proved that IPCA is finely dispersed in the polyamide matrix. From quantitative ¹³C and ¹⁵N NMR spectra, a high concentration (18 ± 2 wt%) of IPCA in the carbon dots was determined. A pronounced gradient in ¹³C chemical-shift perturbations and peak widths, with the broadest lines near the COO group of IPCA, indicated at least partial transformation of the carboxylic acid of IPCA by amide or ester formation.     

Hantzsch Ester as a Visible-Light Photoredox Catalyst for Transition-Metal-Free Coupling of Arylhalides and Arylsulfinates

Diethyl 2,6-dimethyl-1,4-dihydropyridine-3,5-dicarboxylate (HEH) has been utilized as a visible-light photoredox catalyst for the cross coupling of arylhalides and arylsulfinates without transition metal, sacrificial agent, and mediator. This method is compatible with various functional groups and provides diaryl sulfones in good to high yields. Mechanistic studies indicate that this reaction undergoes the stepwise light irradiation of HE⁻, single electron transfer (SET) in donor–acceptor complex (DAC) from *HE⁻ to arylhalide, trapping of aryl radical with sulfinate, and SET oxidation of sulfone radical anion by HE^. to sulfone by the DAC method.     

Engineering Bifunctional Host Materials of Sulfur and Lithium-Metal Based on Nitrogen-Enriched Polyacrylonitrile for Li–S Batteries

Lithium–sulfur batteries (LSBs) still suffer from the shuttle effect on the cathode and the lithium dendrite on the anode. Herein, polyacrylonitrile (PAN) is developed into a bifunctional host material to simultaneously address the challenges faced on both the sulfur cathode and lithium anode in LSBs. For the sulfur cathode, PAN is bonded with sulfur to produce sulfurized PAN (SPAN) to avoid the shuttle effect. The SPAN is accommodated into a conductive 3D CNTs-wrapped carbon foam to prepare a self-supporting cathode, which improves the electronic and ionic conductivity, and buffers the volume expansion. Thereby, it delivers reversible capacity, superb rate capability, and outstanding cycling stability. For the Li-metal anode, PAN aerogel is carbonized to give macroporous N-doped cross-linked carbon nanofiber that behaves as a lithiophilic host to regulate Li plating and suppress the growth of Li dendrite. Combining the improvements for both the cathode and anode realizes a remarkable long-term cyclability (765 mAh g⁻¹ after 300 cycles) in a full cell. It provides new opportunity to propel the practical application of advanced LSBs.     

Recent Advances in Iodine-Promoted C−S/N−S Bonds Formation

Sulfur-containing scaffold, as a ubiquitous structural motif, has been frequently used in natural products, bioactive chemicals and pharmaceuticals, particularly C−S/N−S bonds are indispensable in many biological important compounds and pharmaceuticals. Development of mild and general methods for C−S/N−S bonds formation has great significance in modern research. Iodine and its derivatives have been recognized as inexpensive, environmentally benign and easy-handled catalysts or reagents to promote the construction of C−S/N−S bonds under mild reaction conditions, with good regioselectivities and broad substrate scope. Especially based on this, several new strategies, such as oxidation relay strategy, have been greatly developed and accelerated the advancement of this field. This review focuses on recent advances in iodine and its derivatives promoted hybridized C−S/N−S bonds formation. The features and mechanisms of corresponding reactions are summarized and the results of some cases are compared with those of previous reports. In addition, the future of this domain is discussed.